Health and Safety News
We scour the Internet for Health and Safety related news items on an almost daily basis.
The news articles and clippings, curated by MD Safety, highlight the requirements for compliance with UK Health and Safety Legislation and best practice across all industry sectors.
The majority of the information and cases will apply to a greater or lesser degree to our broad range of Clients and lessons to be learned will be able to be gained.
‘Don’t turn a blind eye to diabetes’, safety managers are warned
An estimated 4.7million people in the UK are affected by diabetes which, if not treated with proper medication and a healthy diet, can be life-threatening. Perhaps more surprisingly, around 1 million people are undiagnosed and are living wit diabetes without knowing about it. According to Specsavers, only one in five adults is aware that an optician can detect signs of diabetes during an eye test. Many people with diabetes do not get any symptoms and it can take up to 10 years for them to be diagnosed. But left untreated, diabetes can damage the heart, kidneys, eyes and feet.
Read MoreTask specific COSHH guidance for welding, cutting and allied jobs
Revised guidance: exposure to welding fume
In February 2019 HSE issued a safety alert to inform industry of a change in relation to the control expectations for exposure to welding fume including that from mild steel welding.
HSE has now revised its guidance.
The Control of Substances Hazardous to Health direct advice for welding to help make sure exposure to any welding fume released is adequately controlled has been published, along with HSE’s web pages on how to manage exposure to welding fume.
Farm worker blinded by cleaning chemical
In August 2017, an employee was cleaning the walls of the dairy farm at Old House Farm in North Dean, Buckinghamshire, using a corrosive disinfectant DM CiD, which contains potassium hydroxide. The pump sprayer being used unexpectedly developed a fault and ruptured into the face of the employee. His face became covered in the caustic and corrosive disinfectant, rendering him permanently blind in both eyes. The HSE’s investigation found that Beechdean Farm Limited failed to plan and supervise the use of chemicals for cleaning the dairy and did not have effective emergency arrangements in place.
Read MoreRebar welding alert issued
Rebar welders are supposed to be certified to the new CARES Technical Appendices 11 and 12. These cover welding to the International Standard ISO 17660 and the new British Standard BS 8548:2017 Guidance for arc welding of reinforcing steel. The previous appendices and the associated BS 7123: 1989 Specification for metal arc welding for concrete reinforcement have been withdrawn. BAR says that the main changes of the new ISO and British Standard are more rigorous testing including more tensile and shear tests, new regular production tests in addition to the weld procedure and welder qualification tests, plus new requirements for designated welding co-ordinators.
Read MoreUK drone pilots have until end of November to register with regulator
UK drone pilots have until the end of November to register their details with the Civil Aviation Authority. The mandatory requirement to register covers owners of drones or model aircraft weighing more than 250g (8.8oz). Owners of unregistered drones could then face the threat of a fine. At the same time, the CAA is starting a service it hopes will reunite owners with their lost drones.
Read MoreForklift truck safety shortcomings revealed
Mentor FLT Training has released a new report on ways to improve site safety after its recent survey revealed the troubling realities of forklift operations. Forklift Safety Insights was released to coincide with the Fork Lift Truck Association’s National Forklift Safety Month, an annual campaign that raises awareness in order to reduce the severity and frequency of lift truck accidents in the UK, which has taken place throughout October. Survey respondents were taken from a sample of UK businesses operating forklift trucks on site. As well as forklift use, the survey investigated key areas, such as manager and operator training, safe systems of work, segregation, monitoring, and operating environments.
Read MoreBuilding co fined £65k after carpenter falls from height
Significant gaps in generic risk assessments have led to a worker sustaining nerve and tissue damage to his lower back. Luton Magistrates’ Court was told that on 2 May 2017, a 36-year-old employee was working for MP Building. He climbed up to remove a nail from a brace holding trusses, one of which started to fall causing the employee to fall with it. Raised fall protection decking did not cover the whole area and left significant gaps. The carpenter sustained nerve and tissue damage to his lower back, whiplash to his neck and his little finger was ripped open.
Read MoreGrenfell Tower fire: London Fire Brigade condemned for ‘serious shortcomings’ in its response
72 people were killed by the fire that engulfed the Grenfell Tower block in North Kensington, West London on Wednesday, 14 June 2017. The 24-storey tower block burned throughout the day, taking firefighters over 24 hours to get it under control, leading to confusion and uncertainty that lasted for days. In the report, which will be officially published tomorrow morning, enquiry Chairman Sir Martin Moore-Bick states that fewer people would have died, if the LFB had taken certain actions earlier.
Read MoreDHL fined £2.6m after worker crushed to death in tyre collapse
Robert Baynham, 50, was crushed to death as he worked at an office inside the storage facility in Coventry on 2 February 2016. The company admitted health and safety failings and was sentenced at Warwick Crown Court on Monday. DHL said “safety remains paramount” to the company. Another man suffered serious injuries and two other people were hurt during the same incident at DHL’s tyre distribution centre in Prologis business park on Central Boulevard.
Read MoreStena Line fined £400k following vehicle incident
On 17 September 2017 George Ball, a pontoon traffic marshall working for Stena Line Limited, was struck by a 3.5 tonne delivery van at the company’s port terminal in Birkenhead, Wirral. The van was being reversed off the Stena Lagan vessel onto the pontoon area by a port service operative. The vehicle reversed over Mr Ball’s head and body after the initial collision had knocked him down. Mr Ball suffered multiple injuries that included numerous fractures to his skull, ribs and other bones, and loss of sight in one eye. He has been left with double vision in the other eye and ongoing mental health problems.
Read More